PRODUCT CONTACT:

Ben Parker
Sales Manager
+44 (0)1372 378822
Cordin High-Speed Cameras

Cordin Scientific Imaging Cameras

High speed framing and streak imaging cameras allowing sub-millisecond and sub-microsecond time domain imaging at high resolution.

 

For over sixty years, Cordin has been at the pinnacle of high speed imaging and offers the fastest and highest quality scientific imaging systems in the world with the broadest product line of any high speed imaging provider. Cordin frequently works with end users to develop custom solutions to imaging challenges.

Cordin Scientific Imaging cameras provide high speed imaging solutions for situation that meet the following criteria:

·The event is visually observable and can be detected or triggered

·The event dynamics are in the sub-millisecond or sub-microsecond time domain

·The highest possible speed and resolution are required

·A record length of some hundred or fewer frames is adequate

 

Cordin Cameras are used in a broad variety of short time domain studies and applications such as: Aerodynamics, computer imaging, high energy physics, hydrodynamics, life sciences, materials science research, mechanics, military and defence research, nanotechnology, and time resolved spectroscopy. There are two types of high speed imaging camera that Cordin typically offer; these are “framing” and “streak” imaging cameras.

A framing camera captures an intermittent sequence of two dimensional images at very fast rates. Cordin cameras operate in a burst mode. This means they capture a limited number of frames at very fast rates. Cordin cameras use multiple independent imaging channels around a complex optical system and there is no trade-off between speed and resolution. Cordin cameras offer the fastest framing rates available.

A streak image is like a graph of one dimension of space over time. A streak camera captures a thin line of image information continuously at very fast rates. Cordin offers streak cameras using rotating mirror and image converter technologies. Cordin image converter streak cameras capture light information in the picosecond time domain. Cordin rotating mirror streak cameras capture images with a combination of speed and resolution unavailable anywhere else.

SPECIFICATION OVERVIEW

  • FEATURES:
    • Wide range of high speed imaging cameras with a temporal resolution in at the nanosecond scale down to picoseconds in some models
    • High resolution pictures using frame and streak imaging techniques
    • High frame rates achieved using rotating mirrors, gate intensified relaying, temporal pixel multiplexing, and image convertor relaying techniques
    • A range of high speed and trigger based accessories to compliment high-speed imaging techniques

    Contact: Ben Parker
    Sales Manager

    +44 (0)1372 378822
    ben@qd-uki.co.uk

    Models

    Rotating Mirror Framing Cameras

    Cordin Rotating Mirror Framing Cameras relay an image through a complex optical system centred around a rotating mirror, to multiple independent CCD camera modules.They capture the highest quality, highest resolution images at the fastest speeds compared to any other technology available:

    Framing rate up to 25 million fps

    Number of frames from 20 to 128

    Up to 29 Mpix Resolution

    12-14 bit dynamic range

    Monochrome and colour modes

    Very low image noise

    Post trigger capacity

    Moderate sensitivity

    Large physical size

    Very high complexity

    Electric or gas turbine mirror drive

     

    Model 560: 2 Mpix resolution, 4 million fps maximum speed, 20, 40, or 78 frame capture modes, continuous access triggering

    Model 580: 8 Mpix resolution, 4 million fps maximum speed, 20, 40, or 78 frame capture modes, continuous access triggering

    Model 521: 29 Mpix resolution, 2.5 million fps maximum speed, 24 frame capture, synchronous triggering

    Model 510: 0.5 Mpix resolution, 25 million fps maximum speed, 128 frame capture, synchronous triggering

    Gated Intensified Cameras

    Cordin Gated Intensified Cameras relay an image through beam splitters to Micro-Channel Plate (MCP) intensifiers. These devices convert the incident photons of the image to an array of electrons, which are amplified and shuttered, and then directed to a phosphor. The resulting image is then captured on a CCD. The shuttering of the channels is done in a rapid sequence, capturing a series of images at very fast rates.They have very high sensitivity and extremely short exposure and interframe times. They are available with 2, 4, or 8 imaging channels, and can capture one or two images per channel:

    Framing rate up to 200 million fps

    Number of frames from 1 to 16

    Up to 4 Mpix resolution

    4-8 bit dynamic range

    Monochrome imaging

    Moderate image noise

    Very high sensitivity

    Moderate physical size

    High complexity

     

    Model 212/214: 2, 4, or 8 images, 4 Mpix resolution, minimum exposure time of 15 ns or 2.5 ns, maximum speed of 66 million or 200 million fps

    Model 222-4G: 8 or 16 images, 4 Mpix resolution, minimum exposure time of 2.5 ns, maximum speed of 200 million fps

    Temporal Pixel Multiplexed (TPM) Camera

    Temporal Pixel Multiplexed (TPM) framing camera: The Cordin Model TPM-100 high-speed CMOS camera offers a ground-breaking combination of 1-10 Mfps high-speed framing camera performance at a dramatic new pricepoint.  The Cordin TPM-100 captures images at frame rates of up to 10 million frames per second and up to 1 megapixel resolution.  The system uses a new TPM architecture jointly developed by Cordin and Oxford University with a unique CMOS sensor chip capable of capturing sub-array images in a burst mode.

    With its flexible TPM architecture, the TPM-100 allows the user to trade off the number of frames in a burst versus resolution, given the available on-chip pixel memory.

    The Model TPM-100 camera can be triggered by the event being photographed, and can accept triggers in advance or for some time after the event of interest.It can also provide the trigger to initiate the event. The system comes complete with Cordin’s control software application, and is controlled via Ethernet interface by the customer’s choice of standard Windows-based PC or laptop.Data may be saved in a wide variety of 8 bit file formats. Full 10 bit images are saved in 16 bit TIFF file format.

     

    Framing rate up to 10 million fps

    Number of frames from 1 to 48 or more

    Up to 1 Mpix Resolution (1K x 1K pixels with 10 μm pitch)

    10 bit dynamic range

    Monochrome imaging

    Low image noise

    High sensitivity

    Compact physical size

    Moderate complexity

    Solid state design with no moving parts

    Laser and pulsed flash illumination synchronisation

    Rotating Mirror Streak Cameras

    Cordin Rotating Mirror Streak Cameras relay a slit image through a rotating mirror to capture a continuous record of one line of image information. This produces the highest temporal and spatial resolution streak image possible. Cordin Rotating Mirror Streak Cameras have been a staple in leading labs for decades. The current models of digital cameras are a suitable replacement for and upgrade from the workhorse Cordin film streak cameras:

     

    Sub-nanosecond temporal resolution

    Very high spatial resolution

    12 – 14 bit dynamic range

    Very low image noise

    High sensitivity

    Large physical size

    High complexity

    Applications [explosives testing, complex velocity measurements, impact ballistics, synchro-ballistic imaging]

     

    Model 131: 3,250 pixel spatial resolution, temporal resolution down to 1.35 ns,
    wiring rate up to 2,550 pixels/µs, record length up to 27,600 pixels (90 Mpix total)

    Model 131 HD: 6,400 pixel spatial resolution, temporal resolution down to 0.65 ns,
    wiring rate up to 6,700 pixels/µs, record length up to 46,000 pixels (295 Mpix total)

    Image Converter Streak Cameras

    Cordin Image Converter Streak Cameras relay a slit image to the photocathode of an image converter tube, where the incident photons are converted to electrons. This linear array of electrons is then electrostatically focused and swept across a phosphor screen at the back of the tube, capturing light transients faster than any other method. The Cordin Model 164 Streak Camera is designed to provide very high performance at a competitive price:

     

    Picosecond temporal resolution

    Moderate spatial resolution, 4 – 8 bit dynamic range

    Moderate image noise

    Very high sensitivity

    Moderate physical size

    Moderate complexity

    Applications [time resolved spectroscopy, laser studies, optical communications, semiconductor physics]

     

    Model 164: 25 line pair/mm spatial resolution, 20 picoseconds temporal resolution, 18 mm photocathode width, 4 Mpix readout resolution

    Flash Light Sources

    Cordin light sources are designed to produce high intensity, square wave pulses where one pulse will cover the full record length of the camera.

     

    Model 605: 0.5 - 10 milliseconds flash duration, 5-10 million candela peak output, operating voltage up to 900 V, one or two flash heads

    Model 606: 600 microseconds flash duration, 10 million candela peak output, operating voltage from 800 V to 1800 V, one flash head

    Model 607: 80 - 900 microseconds flash duration, 30 million candela peak output, 5 kV operating voltage, one flash head

    Time Delay Generators

    Cordin time delay generators have a clear user interface, high voltage outputs, and resolution down to 10 nanoseconds. They can be operated either through the front panel or through a graphical interface via USB connection:

     

    10 nanoseconds – 99.99 milliseconds delay range

    10 ns step size

    high voltage outputs at +30, +60, +90, or +125 V

     

    Model 454 (4 channels)

    Model 458 (8 channels)

    High Voltage Pulser

    Cordin's Model 640 high voltage pulser is the industry standard for reliable, definite triggering of energetic events.

     

    Model 640: TTL or +50V Input trigger, +3 to +5 kV output voltage, 850 ns response time, 15 ns jitter

    Camera Dollies

    Cordin manufactures camera dollies specifically designed to be used with our cameras. We also make a range case for using the cameras in harsh environments.

     

    Model 1500: Adjustable Mobile Cart which supports 560, 580, 131, 131-HD, and 222 camera models

    Supplier info:

    For even more information, why not visit our suppliers website.

    VISIT SUPPLIER

    PRODUCT VIDEOS:

    DOWNLOADS: